SWS Soudal Window System - Sealing Kit
Out of stock
SKU
130577-1
£0.00
£0.00
Soudal Window System (SWS) offers an ideal solution for optimising the energy performance of buildings, through combining (certified) high-quality products for a long lasting, well insulated, airtight and weatherproof seal around windows and door connections.
The diverse range of products (sealants, PU-foams, pre-compressed tapes, liquid membranes and self-adhesive tapes) means SWS can always offer the right combination and solution regardless of the building or installation method.
Combined products include;
Outside application : Soudal Soudaseal 215 LM - 290ml
Airtight premium quality polyurethane expanding foam filler for use around windows & doors. Superior thermal and acoustic insulation properties. Totally airtight after curing.
Middle application : Soudafoam Gun Window & Door SWS PU Foam - Gun Grade (750ml)
Airtight premium quality polyurethane expanding foam filler for use around windows & doors. Recommended for all A, A+ and A++ windows and doors. Vastly improved thermal and insulation properties. Totally airtight after curing.
Applications
Recommended for all A, A+ and A++ windows and doors or any applications where an airtight seal is required. Sealing gaps where improved thermal and acoustic properties are required. Any joint filling which has high and repetitive movement or where vibration resistance is required. Thermal and acoustic insulation around doors and window frames.
Example of Applications
• Jointing in a sloping roof
• Thermal insulation
• Acoustic insulation
• Insulation of window and door frames outside
• Airtight sealing
Size: 750ml.
Colour: Blue.
Type: Gun grade expanding foam.
The diverse range of products (sealants, PU-foams, pre-compressed tapes, liquid membranes and self-adhesive tapes) means SWS can always offer the right combination and solution regardless of the building or installation method.
Combined products include;
Outside application : Soudal Soudaseal 215 LM - 290ml
Airtight premium quality polyurethane expanding foam filler for use around windows & doors. Superior thermal and acoustic insulation properties. Totally airtight after curing.
Middle application : Soudafoam Gun Window & Door SWS PU Foam - Gun Grade (750ml)
Airtight premium quality polyurethane expanding foam filler for use around windows & doors. Recommended for all A, A+ and A++ windows and doors. Vastly improved thermal and insulation properties. Totally airtight after curing.
Applications
Recommended for all A, A+ and A++ windows and doors or any applications where an airtight seal is required. Sealing gaps where improved thermal and acoustic properties are required. Any joint filling which has high and repetitive movement or where vibration resistance is required. Thermal and acoustic insulation around doors and window frames.
Example of Applications
• Jointing in a sloping roof
• Thermal insulation
• Acoustic insulation
• Insulation of window and door frames outside
• Airtight sealing
Size: 750ml.
Colour: Blue.
Type: Gun grade expanding foam.
Before use: Consult
Safety Data Sheet before use, put on protective gloves.
Surface preparation:
All surfaces must be clean, and free from oil, grease and loose materials. Spray/moisten surfaces with clean water before use as this will improve both expansion and adhesion of the product. Shake the can of foam thoroughly (for at least 30 seconds) before application in order to thoroughly mix the foam components.
Screw the applicator onto the can. Only using the can upside down, with the valve facing down: commence foaming at the lowest point of the joint and proceed carefully until familiar with the extrusion rate.
Fill the cavity about half full of foam as post expansion will totally fill the cavity. After application the foam can be cut as soon as it has cured. Uncured foam can be removed using acetone or PU foam gun solvent but care must be taken not to damage surfaces.
When cleaning the PU Foam Gun: unscrew the can of Soudafoam from the gun. Press the gun trigger to release pressure to remove any residual foam from the gun. Fix the spray nozzle onto the Foam Solvent valve and spray the valve of can and the gun adapter to remove any Soudafoam residue.
Remove the nozzle and screw the can of Solvent Cleaner onto the gun. Press the gun trigger several times to clean any uncured Soudafoam from the gun, taking care to be spraying away from you into a suitable container. Spray until clear fluid starts flowing.
Note: Foam Solvent is only suitable for dissolving uncured one part PU aerosol foam. Foam Cleaner is not suitable for use on polystyrene, PVC and other plastics, testing is required prior to use. Soudafoam must be protected from exposure to UV light after curing (e.g. with paint or plaster). Failure to do so will degrade the foam. The rate of cure is fully dependant upon temperature and humidity. Low temperatures and humidity will slow the rate of cure. Poor adhesion to low surface energy materials such as PE, PP, PA, silicone and PTFE can be expected
Safety Data Sheet before use, put on protective gloves.
Surface preparation:
All surfaces must be clean, and free from oil, grease and loose materials. Spray/moisten surfaces with clean water before use as this will improve both expansion and adhesion of the product. Shake the can of foam thoroughly (for at least 30 seconds) before application in order to thoroughly mix the foam components.
Screw the applicator onto the can. Only using the can upside down, with the valve facing down: commence foaming at the lowest point of the joint and proceed carefully until familiar with the extrusion rate.
Fill the cavity about half full of foam as post expansion will totally fill the cavity. After application the foam can be cut as soon as it has cured. Uncured foam can be removed using acetone or PU foam gun solvent but care must be taken not to damage surfaces.
When cleaning the PU Foam Gun: unscrew the can of Soudafoam from the gun. Press the gun trigger to release pressure to remove any residual foam from the gun. Fix the spray nozzle onto the Foam Solvent valve and spray the valve of can and the gun adapter to remove any Soudafoam residue.
Remove the nozzle and screw the can of Solvent Cleaner onto the gun. Press the gun trigger several times to clean any uncured Soudafoam from the gun, taking care to be spraying away from you into a suitable container. Spray until clear fluid starts flowing.
Note: Foam Solvent is only suitable for dissolving uncured one part PU aerosol foam. Foam Cleaner is not suitable for use on polystyrene, PVC and other plastics, testing is required prior to use. Soudafoam must be protected from exposure to UV light after curing (e.g. with paint or plaster). Failure to do so will degrade the foam. The rate of cure is fully dependant upon temperature and humidity. Low temperatures and humidity will slow the rate of cure. Poor adhesion to low surface energy materials such as PE, PP, PA, silicone and PTFE can be expected
Click on the icon below to download our free documents relating to the SWS Soudal Window System - Sealing Kit. Thank you.
Other products you might be interested in
